Kramer Electronics Ltd.
AFM-20DSP
– Connecting the 20-Port Audio Matrix
12
Connecting AFM-20DSP-AEC
After connecting your
AFM-20DSP-AEC
, connect its power and then switch on the power to
each device.
Figure 8: Connecting to the
AFM-20DSP-AEC
Rear Panel
To connect
AFM-20DSP-AEC
as illustrated in the example in
1. Connect these audio sources to the PORT balanced mono 3-pin terminal block
connectors
(port I/O is set to 12x8 in this example):
▪
Microphones to ports 1 to 9.
▪
The audio output of the Kramer
VP-444
scaler to port 10.
▪
An MP3 player to ports 11 and 12.
2. Connect the PORT balanced mono 3-pin terminal block connectors
(port I/O is set to
12x8 in this example) to the following audio acceptors:
▪
Ports 13 and 14 to powered speakers (for example, Kramer
Tavor 6-O
).
▪
Port 15 to a power amplifier with speakers.
▪
Ports 16 to 20 to audio receivers
3. Connect the HDMI connectors as follows:
▪
A source (for example, a Blu-ray player) to HDMI IN
.
7
7
9