10
840Hxl - Operating the 840Hxl Pattern Generator
3. Press the
+
or
–
button to cycle through the list of available patterns until the
required pattern is displayed on the 7-segment display.
Note:
The display flashes if there is a problem communicating with the display, for
example, if the display does not support HDCP or does not support the selected
resolution.
6.2
Operating the 840Hxl Using the Control Application
The
840Hxl
Control Application
is a PC-based program which lets you program
and control the device.
To use the
840Hxl
Control Application
you must download and install the USB
driver and the
840Hxl
Control Application.
6.2.1
Downloading and Installing the USB Driver and Control Application
Note:
The driver only works on 32-bit systems.
To install the USB driver and Control Application
:
1. Navigate to the Kramer Electronics Web site
.
2. Click on the
Downloads
tab.
3. Download the
840Hxl
Windows USB Driver.
4. Download the
840Hxl
Control Application
to a designated folder on your
computer.
5. Extract the compressed USB driver file to your designated folder.
Two files are extracted, a
.inf
and a
.sys
file.
6. Connect the USB cable between your computer and the
840Hxl
.
7. Connect the power supply to the
840Hxl
.
8. After a few seconds the
Found New Hardware
message appears as shown