RC-76R/RC-78R - Connecting the RC-76R/RC-78R
11
4.4
Connecting the K-NET Port
The K-NET port is wired as shown in
Figure 4: K-NET PINOUT Connection
If your device is the first or last device on the line, slide the K-Net termination
switch up otherwise make sure it is set to down (see
4.5
Grounding the RC-76R/RC-78R
The grounding screw is used to earth the chassis of the unit to the building ground
preventing static electricity from impacting the performance of the unit.
defines the grounding screw components.
Figure 5: Grounding Connection Components
#
Component Description
1
M3X6 screw
2
1/8" Toothed Lock Washer
3
M3 Ring Tongue Terminal
Summary of Contents for 2900-300253
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL RC 76R RC 78R Room Controllers P N 2900 300253 Rev 5...
Page 2: ......
Page 18: ...RC 76R RC 78R Front Panel Button Caps and Labels 15...
Page 19: ...16 RC 76R RC 78R Front Panel Button Caps and Labels Figure 6 Sample Button Label Sheet...