102MX
Quick Start
P/N: 2 9 0 0 - 3 0 1 2 8 6 QS
Rev: 2
Scan for full manual
102MX Quick Start Guide
This guide helps you install and use your
102MX
for the first time.
www.kramerav.com/downloads/102MX
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
102MX
2 Channel Audio Mixer
4 Rubber feet
1 Quick start guide
1 Power supply (12V DC)
1 Bracket set
Step 2: Get to know your 102MX
#
Feature
Function
1
LINE OUT (L, R)
RCA Connectors
Connect to the right and left channels of a line level stereo audio acceptor.
2
LINE 2 IN (L, R)
RCA Connectors
Connect to the right and left channels of a line level stereo audio source.
3
TALK OVER
Button
Press to activate the talk-over function.
4
MIC SELECT
Button
Press to select the Input 1 mic level signal, release to select Input 1 line level signal.
5
COND. MIC
Button
Press for a powered condenser mic, release for an unpowered dynamic mic.
6
MIC/LINE 1 IN
6mm Socket
Connect to a mic or line level source.
7
MASTER LEVEL
Knob
Use to control the mixed signal output level.
8
LINE 2 LEVEL
Knob
Use to control the line 2 input level.
9
MIC/LINE1 LEVEL
Knob
Use to control the mic/line 1 input level and talk-over sensitivity.
10
ON
LED
Lights when the unit is ON.
11
12V DC
Connector
Connect to the 12V DC power supply.
Step 3: Mount 102MX
Install
102MX
using one of the following methods:
•
Attach the rubber feet and place the unit on a flat surface.
•
Fasten a bracket (included) on each side of the unit and attach it to a flat surface
www.kramerav.com/downloads/102MX
•
Mount the unit in a rack using the recommended rack adapter
www.kramerav.com/product/102MX
•
Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
