Kraissmann 2000 AH 45, User Manual, Page: 7 / 16

Demolition hammer | 7
6 |
English
ENGLISH
⚠ IMPORTANT!
When using the equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read the
complete operating instructions and safety regulations
with due care. Keep this manual in a safe place, so that
the information is available at all times. If you give the
equipment to any other person, hand over these operating
instructions and safety regulations as well. We cannot
accept any liability for damage or accidents which arise
due to a failure to follow these instructions and the
safety instructions.
Safety regulations
The corresponding safety information can be found in the
enclosed booklet.
DANGER!
Read all safety regulations and instructions. Any errors
made in following the safety regulations and instructions
may result in an electric shock, fi re and/or serious inju
-
ry. Keep all safety regulations and instructions in a safe
place for future use.
PROPER USE
This machine is designed for heavy duty demolition and
chiseling work using the appropriate chisel.
The equipment is to be used only for its prescribed pur
-
pose. Any other use is deemed to be a case of misuse. The
user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result
of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in com
-
mercial, trade or industrial businesses or for equivalent
purposes.
TECHNICAL DATA
Power, W ................................................................ 2000
Voltage, V ..................................................................
230
Frequency, Hz ............................................................. 50
Impact rate, min -1 ......................................
900-1890
Impact power, J ......................................................... 45
Max. drilling diameter, mm ....................................
40
Sound and vibration
Sound and vibration values were measured in accordance
with EN 60745.
L pA sound pressure level ...................
97.5 dB(A)
K pA uncertainty ............................................ 0.55 dB
L WA sound power level ...................
104.9 dB(A)
K WA uncertainty .......................................... 0.55 dB
Wear ear-muffs
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Vibration emission value a
h
= 17.09 m/s2
K uncertainty = 1.5 m/s2
The specifi ed vibration value was established in accor
-
dance with a standardized testing method. It may change
according to how the electric equipment is used and may
exceed the specifi ed value in exceptional circumstances.
The specifi ed vibration value can be used to compare the
equipment with other electric power tools.
The specifi ed vibration value can be used for initial as
-
sessment of a harmful effect.
Keep the noise emissions and
vibrations to a minimum
▶ Only use appliances which are in perfect working or -
der.
▶ Service and clean the appliance regularly.
▶ Adapt your working style to suit the appliance.
▶ Do not overload the appliance.
▶ Have the appliance serviced whenever necessary.
▶ Switch the appliance off when it is not in use.
▶ Wear protective gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in accordance with
instructions, certain residual risks cannot be rules out.
The following hazards may arise in connection with the
equipment’s construction and layout:
▶ Lung damage if no suitable protective dust mask is
used.
▶ Damage to hearing if no suitable ear protection is used.