Kraftronic 972770, Manual

Page: 39 / 46

39
OPERATION
WARNING!
Wear suitable clothing, ears and eyes protecting when working with
the equipment. Ensure that the equipment is functional before each
use. Ensure that the mains voltage value matches the label on the
equipment. Check the safe condition of the machine:
- Check it for visual defects.
- Check that all parts of the machine have been securely fitted.
- Check if the water connector and the high-pressure pipes are tight.
Starting and stopping
Note: put the high pressure washer on a smooth ground. Stand in a secure and
stable position.
Starting:
i. Open the water inlet valve
ii. Unlock the safety trigger on the spray gun, and press the trigger until there is a
steady stream of water. (FIG 10)
iii. o switch the machine on, set the On(1)/Off(0) switch to ON(1) (FIG 11)..
Stopping:
iv. Release the trigger(FIG 12).
v. To switch the machine off, set the On(1)/Off(0) switch to OFF(0).
(FIG 8)
vi. Close the water inlet valve
Attention!
Risk of machine damage!
Never operate the machine without water inlet as dry running may damage the
pump. Use a water filter if the inlet water is contaminated.
Working with the Electric High pressure washer
Risk of fatal injury!
Use special care when cleaning tyres. Vehicle tyres/tyre valves may become
damaged or burst when handled improperly. First signs of damage included
discolorations on the tyre. Damaged vehicle tyres/tyre valves pose a life-threatening
risk. Keep the jet at a distance of at least 30 cm!
Risk of fatal injury!
The high-pressure jet may be dangerous when handled improperly. The jet may not
be directed towards living beings (persons, animals), live equipment or the machine
itself.