KRAFT KF-ORC4511TSW, User Manual

Page: 16 / 24

16
USER GUIDE
OIL RADIATOR
ATTENTION! The heater may only be used in its usual strictly vertical position.
position when it stands on wheels securely attached to it, and the panel control
is located on the top of the instrument. Using the heater in a different position can
lead to dangerous situations.
EXPLOITATION
1. Place the heater with the wheels down on a level, firm surface, resistant to high tem-
peratures. Make sure 1 meter away there are no flammable or heat-resistant objects
around the appliance. Using the heater in a position other than vertical may lead to
dangerous situations.
2. Move the thermostat and power mode knobs to the minimum position, turning them
counterclockwise. Then plug the power cord into a suitable electrical outlet. The pow-
er of the socket must correspond to the parameters indicated on the product label.
3. Set the desired power mode of the heating elements by turning power switch clock-
wise.
4. Turn the thermostat knob clockwise to the maximum position. The heater will turn on.
When the room temperature reaches the desired level, slowly turn the thermostat
knob counterclockwise
Now the heater, periodically turning on and off, will maintain a constant temperature
in the room.
To change the room temperature, turn the thermostat knob to clockwise to increase
the temperature, or counterclockwise to to downgrade. The heater will automatically
maintain the temperature in the room in accordance with the thermostat settings,
cycling on and off. turning off.
5. To turn off the appliance, turn the thermostat and power mode knobs to minimum
position. The indicator should turn off.
6. Disconnect the heater from the mains by unplugging the power cord from the socket
when not in use.
CLEANING AND STORAGE
• An electric heater requires regular maintenance. At least once every 10 days, the
device should be cleaned.
• Before cleaning, turn the mode switch to position 0 (OFF), unplug the power cord
from the mains, and allow the appliance to cool completely.
• Use a damp cloth for cleaning. Before each subsequent use, make sure that the
heater is fully assembled and in good working order.
• Do not touch the hot surfaces of the appliance. If you need to move the heater, grab
the handle or use oven mitts.
• Wipe the outer surface of the heater with a soft damp cloth.
ATTENTION! Do not allow water or other liquids to come into contact with
organs control and inside the unit, it may result in electric shock and/or fire. Do
not use solvents or abrasives for cleaning as they may damage the surface of the