29
ГАЗОВАЯ ПЛИТА
GAS STOVE
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
• It is not recommended to cook more than one dish at once. Thus, less electricity will be
consumed during cooking without changing the cooking temperature.
• Preheating should be done for a short period of time (maximum 10 minutes).
Important! The appliance must be switched off after each use.
CLEANING AND CARE
Warning! Disconnect the appliance from the power supply before cleaning, make sure
it is completely cold. The appliance must be cleaned regularly. Care should be taken during
the cleaning procedure.
To keep the enamel surface shiny for as long as possible, the appliance should be washed
with warm water and detergent after each use. After the oven has completely cooled down,
remove any remaining fat with a sponge or a damp cloth and warm soapy water. Do not use
abrasive wipes or sponges that may scratch the enamel.
attention! Do not use a high-pressure cleaner or steam jet cleaners, as penetrating
moisture may cause electric shock. Do not use abrasives.
• Clean the burner's flame divider frequently with boiling water and detergent to remove any
remaining fat that may block the flame from escaping.
• Wash stainless steel parts well with water and dry them with a soft cloth.
• Use slightly damp sponges and wipes to clean the hob.
• Do not use too much water, as it may get inside of the appliance and damage electrical
parts.
• Do not immerse the appliance in water.
• The grids of the hob can be washed in the dishwasher.
• For persistent stains, use regular non-abrasive detergents.
• The control panel, knobs and buttons of the white oven and the stainless-steel oven must be
washed every time after cooking.
• Wash the glass of the oven door only with warm water, and avoid using coarse cleaners and
cloths. Use a mild surface cleaner.
• The side grids for setting the baking trays can be removed from the oven and cleaned with a
soft surface cleaner. Follow the steps required to do this, as shown in the figure.
• Do not use metal brushes or sponges with abrasive surfaces to avoid damage and
corrosion. Do not use solvents or toxic cleaning liquids.
If the handles become difficult to turn, contact a qualified technician to lubricate them. Also
contact a qualified professional to resolve any other issues that may arise during use.
Important! after removing the burners from the
hob for cleaning, we recommend that you make sure
that all parts of the burners have been correctly re-
installed before lighting them. also, after cleaning or
maintenance, we recommend checking the presence
and position of all rubber gaskets. If they were
displaced, return them to the correct position.
