10
ХОЛОДИЛЬНИК
REFRIGERATOR FREEZER
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
11
ХОЛОДИЛЬНИК
REFRIGERATOR FREEZER
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
4. Положите холодильник на заднюю панель. Открутите ножки, а затем и нижнюю
дверную петлю.
Installation
4. Laying down the refrigerator, take out the adjusting feet as below, then take off the lower hinge
by cross screwdriver.
5. Adjusting the hinge core position of the lower hinge and upper hinge to opposite position
6. Install the lower hinge under to the refrigerator like below, screwing in the adjusting feet, make
sure the position in horizon.
7. Install the lower door, adjust and fix the middle hinge onto the cabinet.
1
2
9
5. Переместите верхнюю петлю — вниз, а нижнюю петлю — вверх.
Installation
4. Laying down the refrigerator, take out the adjusting feet as below, then take off the lower hinge
by cross screwdriver.
5. Adjusting the hinge core position of the lower hinge and upper hinge to opposite position
6. Install the lower hinge under to the refrigerator like below, screwing in the adjusting feet, make
sure the position in horizon.
7. Install the lower door, adjust and fix the middle hinge onto the cabinet.
1
2
9
6. Установите нижнюю петлю, как показано на рисунке, прикрутите затем ножку,
убедитесь в ровном горизонтальном расположении ножек, поднимите холодиль-
ник.
Installation
4. Laying down the refrigerator, take out the adjusting feet as below, then take off the lower hinge
by cross screwdriver.
5. Adjusting the hinge core position of the lower hinge and upper hinge to opposite position
6. Install the lower hinge under to the refrigerator like below, screwing in the adjusting feet, make
sure the position in horizon.
7. Install the lower door, adjust and fix the middle hinge onto the cabinet.
1
2
9
7. Навесьте нижнюю дверь, прикрутите по центру дверную петлю.
Installation
4. Laying down the refrigerator, take out the adjusting feet as below, then take off the lower hinge
by cross screwdriver.
5. Adjusting the hinge core position of the lower hinge and upper hinge to opposite position
6. Install the lower hinge under to the refrigerator like below, screwing in the adjusting feet, make
sure the position in horizon.
7. Install the lower door, adjust and fix the middle hinge onto the cabinet.
1
2
9
8. Установите декоративную крышку на дверь.
Installation
10. Install the plastic cover and Left Door Hinge Cover from poly bag onto the product, settle the
wire (see diagram)
8. Using the Decorative Cover of Right Door from poly bag to cover the insert and take out the other
side one accordingly.In the meanwhile change the wire to another side.
9. Install the upper door, then fix the upper door hinge onto the cabinet.
11.fix the plastic cover and connect the terminal.
10
9. Навесьте верхнюю дверь, затем зафиксируйте дверную петлю.
Installation
10. Install the plastic cover and Left Door Hinge Cover from poly bag onto the product, settle the
wire (see diagram)
8. Using the Decorative Cover of Right Door from poly bag to cover the insert and take out the other
side one accordingly.In the meanwhile change the wire to another side.
9. Install the upper door, then fix the upper door hinge onto the cabinet.
11.fix the plastic cover and connect the terminal.
10
10. Установите пластиковую крышку на дверь и колпачок на петлю, разместите
электропровод.
Installation
10. Install the plastic cover and Left Door Hinge Cover from poly bag onto the product, settle the
wire (see diagram)
8. Using the Decorative Cover of Right Door from poly bag to cover the insert and take out the other
side one accordingly.In the meanwhile change the wire to another side.
9. Install the upper door, then fix the upper door hinge onto the cabinet.
11.fix the plastic cover and connect the terminal.
10
11. Зафиксируйте последнюю пластиковую панель сверху и подключите электро-
питание.
Installation
10. Install the plastic cover and Left Door Hinge Cover from poly bag onto the product, settle the
wire (see diagram)
8. Using the Decorative Cover of Right Door from poly bag to cover the insert and take out the other
side one accordingly.In the meanwhile change the wire to another side.
9. Install the upper door, then fix the upper door hinge onto the cabinet.
11.fix the plastic cover and connect the terminal.
10