EN
DCM7000BT
(1) Temperature coefficient
0.2 x (Specified accuracy) / °C, < 18°C, > 28°C
(2) AC Function
ACV and ACA specifications are ac coupled, true R.M.S.
The crest factor may be up to 3.0 as 4000 counts.
Accuracy is unspecified of Square Wave.
For non-sinusoidal waveforms, Additional Accuracy by
Crest Factor (C.F.) :
Add 3.0% for C.F. 1.0 ~ 2.0.
Add 5.0% for C.F. 2.0 ~ 2.5.
Add 7.0% for C.F. 2.5 ~ 3.0.
Max. Crest Factor of Input Signal:
3.0 @ 3000 counts
2.0 @ 4500 counts
1.5 @ 6000 counts
Frequency Response is specified for sine waveform.
LCD displays 0 counts when the reading < 20 counts.
Specifications
CAT
Application field
General Specifications
Display :
6000 counts.
Overrange Indication :
”OL” or “-OL”
Measure :
Samples 3 times per second .
Max Conductor Size of JAW :
37mm diameter
Dimensions (W x H x D) :
62mm x 240mm x 41mm
Weight :
approx. 430g (including battery)
Low Batteries Indication :
Voltage drops below operating voltage will flash.
Power Requirement :
AA Size Battery x 2 (R6, LR6, 15D, 15A)
Battery Life :
300 hours ALKALINE Battery (without Backlight)
Operating Temperature :
-10 ~10°C
10°C ~ 30°C (
≦
80% RH),
30°C ~ 40°C (
≦
75% RH),
40°C ~ 50°C (
≦
45%RH)
Storage Temperature :
-20°C to 60°C , 0 to 80% R.H. (batteries not fitted)
Altitude :
6561.7 ft (2000m)
Electrical Specifications
Accuracy is given as ± (% of r counts of least significant digit) at 23°C ± 5°C,
with relative humidity Less than 80% R.H., and is specified for 1 year after calibration.
Safety :
EN 61010-1, EN 61010-2-032, EN 61010-2-033 for CAT III 1000V, CAT IV
600V, EN 61326-1
Drop Protection :
4 feet drop to hardwood on concrete floor
Vibration :
Random Vibration per MIL-PRF-28800F Class 2
Pollution degree :
2
Indoor Use
The building installation.
The circuits directly connected to Low-voltage installation.
The source of the Low-voltage installation.
Ⅱ
Ⅲ
Ⅳ
12
