Note: This side has
no Cam Lock holes
Notice: Drawer support panel (9) has edge band
on its front side, and its front side faces to the
front of the drawer.
Notice: Arrow hole on
the rail points to the
front of the drawer
Step 3.1, Securing the drawer rail front end with
Screw D, make sure the drawer rail front end
aligns with the drawer support panel (9) front
side
Step 3.2, Securing the drawer rail back
end with Screw D
Note: This side has
Cam Lock holes
Notice: Arrow hole on
the rail points to the
front of the drawer
Step 3.3, Securing the drawer rail front end with
Screw D, make sure the drawer rail front end
aligns with the drawer support panel (9) front side
Step 3.4, Securing the drawer rail back
end with Screw D
Turn over the board (9) and install
drawer rail on the other side
Summary of Contents for SBD80
