manualshive.com logo in svg

Kozy-World GFD2916, User Manual, Page: 2 / 29

Share
Download
Kozy-World GFD2916 User Manual Download Page 2

 

2 

TABLE OF CONTENTS 

 

Important Safety Information ......................................................................................................................................... 3 

Air For Combustion and Ventilation ............................................................................................................................... 7 

Installation ................................................................................................................................................................... 10 

Operation..................................................................................................................................................................... 16 

Care & Maintenance.................................................................................................................................................... 20 

Troubleshooting........................................................................................................................................................... 21 

Replacement Parts ...................................................................................................................................................... 24 

 WARNING: 

 READ THE INSTALLATION & OPERATION INSTRUCTIONS BEFORE USING THIS APPLIANCE. 

 
IMPORTANT:

 Read instructions and warnings carefully before starting installation. Failure to follow these instructions 

may result in a possible fire hazard and will void the warranty. 
 

PRODUCT SPECIFICATIONS 

MODEL # 

GFD2922 & GFD2916                            GFDC3030 

Input Max. 

26,000 BTU/Hr 26,000 

BTU/Hr 

26,000 

BTU/Hr 26,000 

BTU/Hr 

Input Min. 

19,000 BTU/Hr 20,000 

BTU/Hr 

19,000 

BTU/Hr 20,000 

BTU/Hr 

Gas Type 

Natural 

LP/Propane 

Natural 

LP/Propane 

Ignition 

Electronic Piezo 

Electronic Piezo 

Electronic Piezo 

Electronic Piezo 

Manifold Pressure 

4 in. W.C. 

9 in. W.C. 

4 in. W.C. 

9 in. W.C. 

Inlet Gas Pressure 
Maximum 

10.5 in. 

14 in. 

10.5 in. 

14 in. 

Minimum 

5 in. 

11 in. 

5 in. 

11 in. 

Dimensions, inches (H x W x D) 
Heater 

38.5 in. x 46.5 in. x 15.3 in. 

38.5 in. x 46.5 in. x 28 in. 

Carton 

42.3 in. x 50.5 in. x 19 in. 

42.3 in. x  52.2 in. x 19.9 in. 

Weight, lbs 
Stove 135 

135 

Shipping 156 

154 

 

 

 

 

 

Summary of Contents for GFD2916






























Reviews:

No comments