15
INSTALLATION Continued INSTALLING LOGS
WARNING:
Failure to position the parts in accordance
with these diagrams or failure to use only parts specifically
approved with this heater may included may result in property
damage or personal injury.
CAUTION:
After installation, and periodically thereafter,
check to ensure that no flame comes in contact with any
log. With the heater set to high, check to see if flames
contact any log. If so, reposition logs according to the log
installation instructions in this manual. Flames contacting
logs will create soot.
Figure 13 - Installing Log Set
IMPORTANT:
Make sure log does not cover any
burner ports (see Figure13). It is very important to
install the logs exactly as instructed. Do not modify
logs. Use only logs supplied with heater.
STEP 3:
Install log 3 onto the two slots in right plate.
STEP 2:
Install log 2 onto the two slots in left plate.
STEP 1:
Install log 1 onto the two slots in middle plate.
All logs
STEP 5:
Insert the recessed holes bottom of log 5
onto the pins on log 1 and 2.
STEP 4:
Insert the recessed holes on the bottom of
log 4 onto the pins on log 1 and 3.