29
8
7
6
5
11
10
9
CAUTION
Do not place logs directly over burner port holes.
Improper log placement may affect flame appearance and cause excessive soot to build up on logs and glass.
NOTE
Numbers are located on the bottom of each log. Install in numerical order.
Refer to following instructions and illustrations for proper placement.
1
4
3
2
Align holes in bottom of #1-#3 logs with mounting pins on burner, setting down into position. Place #4 log as shown.
#AL36-500 LOG SET INSTALLATION
Figure 29a
Figure 29b
Position remaining logs in numerical order, aligning pins / holes in upper level logs with pins / holes in base logs
Cutout on back side of log #10 aligns with center tine on log rack.
Randomly place klinkers around front of log rack. Use a stiff bristle brush to distribute rockwool embers onto burner and logs.
