2. Operating the Camera
2-1. Setting up the Camera
You can set up your camera using the OSD display and the buttons on the rear panel. You use the five
pushbuttons on the back of the camera.
Hold down the menu button for longer than 2 seconds to display the main menu. Through this menu, you
can set up camera functions. You can select any of the blinking items. To move to the next page, select
PAGE and press the R button. To go back to the previous page, press the L button.
2-1-1. SENSE UP Setting
(1) If this is not set to OFF or MANUAL, GAIN is automatically set to AGC. Alternatively, you can set
the gain to HYP-AGC.
(i) OFF
The electronic sensitivity enhancement does not function.
(ii) S/N
This option places the camera in the S/N priority mode. It is used to shoot a subject that is not
moving quickly.
The GAIN value increases to up to + 15 dB for AGC or up to + 21 dB for HYP-AGC.
(iii) STD
This option is used when you want to minimize blurring and grain in images.
The GAIN value increases to up to + 36 dB for AGC or up to + 42 dB for HYP-AGC.
(iv) MOVE
This option places the camera in the motion priority mode.
The GAIN value increases to up to + 54 dB for AGC or up to + 72 dB for HYP-AGC.
(v) MANUAL
This option fixes the magnification. You can change the magnification through the SHUTTER
settings.
(2) When one of the above options is selected, press the E button. This allows you to configure the
DAY/NIGHT setting and enable or disable the flicker-less function.
* When SENSE UP is set to OFF, you cannot configure the flicker-less setting. To configure the
flicker-less setting, select 1/100 through the SHUTTER settings.