Overview of the functions of LEDs, buttons and sound signals
Resettable fuse
- the device is equipped with a resettable fuse. If a connected device has a defect or an outlet
is overloaded, the power supply will be shut off. As a result, the fuse button will come out. After the defect has been
removed (the faulty load disconnected) and 30 - 60 seconds have elapsed, you can press this button to return the device
to the original state.
LED indicators [1] to [4]
Device power-up
[1] to [4] reds are on
Standard mode
[1] to [4] are off (or solid green if an outlet is switched on)
Maintenance mode
[4] red is on
Reset to factory settings in progress
[1] to [4] blinks red
Firmware upgrade in progress
[3] blinks red, [4] is solid red
Output states (outlets)
The LED indicating an active outlet is solid green; blinks green
during power-up; is off when the outlet is switched off
Locate function
[1] blinks red
DHCP failure
[2] red is on
Button functions
Rocker switch
On/off
Outlet controls [1] to [4]
To switch on/off, press the button and hold it for 2 seconds
Restart in maintenance mode
On power-up, press button [4] and hold it until the device beeps twice
Reset to factory settings
On power-up, press buttons [1] and [2] and hold them until the
device beeps twice
Sound signals
Device power-up
One beep
Request to restart in maintenance mode received
Two beeps
Request to reset to factory settings received
Two beeps
Reset to factory settings complete
Two beeps
LED indicators for Wi-Fi and Bluetooth (Bluetooth only on NETIO4 All)
Active
Is lit
Inactive
Light is out
Problem
Blinks
11
