5. Configure the network parameters and click on
Change settings
. This will save the settings and restart the device
network services. After the restart of the network services, the device will be available at the selected network address.
6. To access the NETIO4/NETIO4 All web interface, point the browser to its IP address or double-click on the IP address
of the device detected by the
http://discover.koukaam.com
web service.
7. The login page will display. Enter your username, password and click
Log in
. The web interface of the device
will show.
The default username is: "admin", the password is: "admin".
After the first login, we recommend that you update the firmware to the latest version available, change the default
password, set the time zone, date and time. We also recommend changing the default parameters for connecting to
Wi-Fi.
Wi-Fi Access Point
The NETIO4/NETIO4 All device supports Wi-Fi 802.11 b/g/n 2.4 GHz wireless networks (AP and client modes).
After the first power-up, the NETIO4/NETIO4 All is configured as a Wi-Fi Access Point so that you can connect to it
from any personal computer or other device using a Wi-Fi adapter. For connecting to Wi-Fi, please use the following
parameters:
After connecting to the Wi-Fi, the NETIO4/NETIO4 All device will be available at this address:
http://192.168.2.78/
.
The DHCP server assigns an IP address to the Wi-Fi clients connected to the NETIO4/NETIO4 All device from the
address range 192.168.2.0/24.
Note: the network adapter in the NETIO4/NETIO4 All device remains active.
More information on the support for wireless networks and their modes can be found in the User’s guide in the chapters
Setting up Wi-Fi and Network mode.
Network SSID:
Netio4
Security:
WPA2-PSK
Encryption:
AES
Password:
12345678-Netio4
10
