4
• After starting the utility click on the
Discover
button and after a moment the application will find the available device
(Discover in progress). If the utility does not find your IPCorder, try to switch off the firewall, or antivirus. If the IPCorder
is in Service mode (formerly known as Rescue mode), you can help it by using the button
Device setup
to change
the network parameters. In the event that the current IPCorder IP address is not in the same range of the network as
the IP address of your computer, or the routing is not setup among those networks, the IPCorder address must be
setup in the range of the network of your computer.
• For easier physical localisation of IPCorder you can click on the button
Locate
– a red diode with an exclamation
mark symbol will begin to blink on IPCorder.
• Click twice on the required device. The interface of the IPCorder Service mode will be displayed in the default internet
browser, this will be indicated by a lit red diode with an exclamation mark symbol.
• You will be asked to configure the RAID
array on the
Storage Configuration
screen.
After its successful creation, restart to the
Normal mode.
• The Normal mode is indicated when the
blue diodes light up. You will find more
information about the configuration in the
relevant user manual on the enclosed CD.
• The login window will shortly appear. The
default user account is
admin
, the default
password
admin
.
• After the first login the
Configuration Wizard
will appear which will help you with the basic IPCorder settings. Please
pay close attention to setting your password and the system time. You can also let IPCorder find the cameras in your
network and set up their recording options. All these actions are accessible via the
Settings
menu. You will find more
information about the settings in the relevant user manual on the enclosed CD.
• Upgrade the firmware to the latest version for the optimal use of all the IPCorder functions. The on-line upgrade of
your IPCorder is available at
, where you will also find more
information about the latest versions of firmware.
