background image

IPCorder KNR-5016/20/32/40

Quick Installation Guide

Thank you for purchasing this KOUKAAM product. Before you start using it, please read this installation guide which
will quickly guide you through the setup process. For more information please refer to the 

User manual

available

on the enclosed CD or download it from 

Important safety instructions

The purchased device works under voltage. If wrongly handled the device could be damaged or cause injury to the
person handling the device.

• The manufacturer is not liable for potential damage caused by incorrect usage or placing the device in an unsuitable

environment.

• The device is not designed for outdoor use.

• Do not use the device in an environment with strong vibrations.

• Unauthorized modification of this device can damage it or cause a fire.

• Prevent from contact with fluids; do not expose the device to high temperatures.

• Protect the device from falling.

• It is permitted to use accessories only intended for the device (hard disks, cables, etc.).

• In case of the malfunction of the device, contact your dealer.

This guide is intended for IPCorder KNR-5016/5024/5032/5040. Individual models differ by the maximum possible
number of simultaneously connected cameras or videoservers:

KNR-5016:

up to 

16

cameras or videoservers

KNR-5024:

up to 

24

cameras or videoservers

KNR-5032:

up to 

32

cameras or videoservers

KNR-5040:

up to 

40

cameras or videoservers

1

Summary of Contents for KNR-5016









Reviews: