17
2. Motion 2 is green frame :Trigger happened in this scope, it will show red words -MD2 Warning!!
Motion Detect Set: Can set up sensitivity(1~99),default is 15,the value is more low and the detection is
more sensitive.
PS: Resolution is 640x480 can select anyplace as trigger scope of image.
Resolution is 320*240 can select anyplace as trigger scope of image.
Resolution is 160*120 select all image as trigger scope.
Network setting
This menu can set up or change the assignment of IP CAM network connections. There are three
chooses: STATIC, DHCP, PPPOE.
A. STATIC work for both real and dynamic IP address .
B. IN DHCP modes, the IP address was appointed by DHCP Server;
C. PPPOE is a connect way support by ISP company .
A .Set up STATIC mode, steps:
The IP address of IP camera 9060 should in the same subnet with your PC , subnet mask, default gateway
mast same as 9060 also.