background image

Warranty terms and scope

KOTA Equipamentos guarantees the product and its accessories for 

defects in materials and workmanship; always they have been used in 

accordance with the conditions of use specified in the User’s Manual.

The warranty period is one year from the date of the purchase invoice, 

being 3 (three) months of legal guarantee and 9 (nine) months of 

contractual guarantee.

The replaced parts or accessories will be guaranteed for a period of 90 

(ninety) days from the date of return of the appliance to the customer or for 

the remaining time of the original warranty, whichever is the last.

Warranty: ItEMS ExCLuDED

This warranty does not cover:

•  Damage resulting from the use of the product in a manner other than

  that specified in the user’s manual.

•  Defects caused by installations, alterations, tests or any type of

  modifications by people or technical services not authorized by KOTA

 Equipamentos.

•  Products with the serial number removed or illegible.

•  Damages caused by spillage of aggressive substances on the product.

•  Electrical discharges or variations of electrical current that may damage

  the equipment.

In case of be necessary to contact KOTA Equipamentos, have the purchase 

invoice of the equipment and the respective serial number.

15

Summary of Contents for Furnace PRO

















Reviews: