Kostal Smart Energy Meter, Installation Instructions Manual

Page: 86 / 348

© 2019 KOSTAL Solar Electric GmbH 86
Installation instructions
Intended use
The KOSTAL Smart Energy Meter is a measuring device, which determines
electrical measuring values at the connection point and is available via LAN or
RS485.
The KOSTAL Smart Energy Meter is not an electricity meter for measuring
active consumption in the sense of the EU Directive 2004/22/EC (MID); it may
only be used for internal accounting purposes. The data about your system’s
energy generation collected by the KOSTAL Smart Energy Meter may deviate
from the data of the main energy meter.
According to its classification as overvoltage category III, the KOSTAL
Smart Energy Meter may only be connected in the sub-distribution / circuit distri-
bution on the consumer side behind the energy supply company’s energy meter.
The KOSTAL Smart Energy Meter is only suited to indoor use.
The KOSTAL Smart Energy Meter is approved for use in EU member states.
Only use the KOSTAL Smart Energy Meter if not damaged in any way and
in accordance with the details provided in the enclosed documentation. Any
other form of use or use of damaged devices may result in damage to property
or personal injury.
For reasons of safety, the product (including the software) must not be modi-
fied and components must not be fitted if they are not expressly recommended
or sold by KOSTAL Solar Electric GmbH for this product. Any form of product
use other than that described in the intended use section is not considered to
be intended.
Operators are prohibited from undertaking unauthorised changes, conversions
and repairs as well as opening the product.
The enclosed documentation forms part of the product and must be read,
noted and kept accessible at all times.