20
Configuration
Configuration
9:37 Thu 22.04.2021
9:37 Thu 22.04.2021
CONFIGURATION:
Configuration:
adaptation of the boiler to the heating
system in the facility.
* Changes in the configuration menu are possible after entering an access code. When prompted
for an access code, turn the navigation dial to the required code and confirm the code by pressing
the dial. If you want to retract from the code request screen, hold the navigation dial or wait until
automatic return to main function screen.
Code : 987
•
Buffer (available only in buffer mode
[
Configuration > Working mode: Buffer]
):
- Buffer temp.: temperature of the buffer charging medium.
- Load off-program:
Yes - consent to work outside the schedule with parameters according to the
needs of the heating modules
No - charging in time frames according to program
•
Central heating:
- Weather comp.*: Choice of heating curve.
- Offset*: offset of the heating curve.
- Max boiler temp.: maximum CH temperature.
Attention: adjustment of too high temperature parameters not compatible with
the type of building, central heating installation and building’s insulation may lead
to high exploitation costs.
- Set boiler temp.: Temperature in CH installation when cooperating with constant
parameters and in emergency conditions.
- Regulation: Per curve / Constant.
Per curve > temperature in CH installation is calculated on the basis of outside
temperature and heating curve parameter.
Constant > temperature in CH installation is equal to SET BOILER TEMP
- Frost protection: frost protection of the building ON.
* not available in buffer mode
Summary of Contents for EKCO.M3
Page 35: ...PL 090B_f 35...
