background image

The power doesn't supply to the meter.

    

→Please make sure the wiring is

    connected. 

    

The wiring and fuse are not broken.

    

→The battery is broken or the battery is

    too old to supply enough power

    (DC 8 V) to make the meter work.

make sure the voltage is over DC 8 V.

Make sure the speed sensor is 

    connected properly.

 

    

Please check if speed sensor is

    connected and working properly. Also

    check whether the cable of speed sensor

    has broken or lose or not. 

Check the tire-size setting.

    

Refer to the manual 4-1 circumference

    

and sensing point setting.

The following situation do not indicate malfunction of the meter.Please check the following before taking it in for repair.

The meter doesn't work when

the power is on.

The meter shows wrong

information.

Speed does not appear or

appear incorrectly.

 

Check the voltage of your battery,and

    

    

    

Fuel gauge does not appear

or appear incorrectly.  

The odometer and trip meter

is not accumulated or

accumulated wrong data.

Check your fuel tank.

Check the wiring harness.

Is the wire connected properly.

Check the tire-size setting.

→Refer to the manual 4-3 fuel gauge

resistance setting.

It is possible that the permanent power 

Tachometer does not appear

or appear incorrectly

● Please check the RPM sensor wiring is

   connected correctly.

● Please check the spark plug is R type or

   not. If not, please replace the spark plug

   with the R type spark plug.

● Please check your setting.

 

→Please refer to the manual 4-2 

RPM

   pulse setting.

    wire is not connected well. 

    →Please check the red positive wire is 

    connect well or not. 

* If the problem is not resolved after following the steps shown above, please contact your loval distributor for assistance.

● It is possible that the permanent power 

   wire is not connected properly. 

   →Check if the red positive wire is 

   connect propery. 

The odometer and trip meter

are not accumulated or

accumulated the wrong data.

Check item

Trouble

Check item

Trouble

●Example

Current internal ODO is

  50,000 km.

●Press the 

Select button three seconds

  to go back to ODO screen.

●The main screen.

Setting range

99999.9

 km (mlie).

User unable to adjust and

clearinternal ODO.

NOTE

4-9

Internal ODO

5

Trouble shooting

wh041ba02a(P6-6)

Summary of Contents for DB-01







Reviews: