KOSMEN KM-20N, User Manual

Page: 8 / 24

4
TIMING:
When the timing is activated, the timing indicator will be green.
LOW WIND SPEED:
When you set the wind speed to low, the low wind indicator will be green.
HIGH WIND SPEED:
When you set the wind speed to high, the high wind indicator will show green.
DRYING CLOTHES:
When the dehumidifier is set to the "Dry" mode, the wind speed is set to high and runs in continuous
dehumidification mode, and the indicator light is green.
COMFORT:
When the dehumidifier is set to “Comfort” mode, the wind speed is set to low, the humidity is set to 60%, and the
indicator light is green.
ANION:
When set “Anion”, the anion button will turn green. (Only available on KM-20N and KM-60S.)
3.
Operating Instructions
When the appliance is powered on for the first time, the appliance enters the standby state, press the power button
to enter the running state, and the first power-on and start-up operation is continuous dehumidification, the motor
runs at low speed, the continuous dehumidification indicator lights, if it is turned on again after the power off,
Humidity setting programmed same as before power shutdown.
Press the humidity mode button, the humidity can be switched between 70% 60% 50% 40% continuous
dehumidification, the corresponding indicator light on, if the pre-set humidity is higher than the current ambient
humidity +5%, the machine will stop working after 5 seconds. When the set humidity is lower than the current
ambient temperature, the machine will work normally.