Trouble Shooting
E-Waste Disposal
If there is something wrong with the induction Cook Top, please check it as following before
sending to repair.
This symbol on the product or on the container indicates that this product
cannot be eliminated with the general waste. The user is responsible for
eliminating this kind of waste by throwing them away at a "recycling point"
specifically for electrical and electronic waste. Selective collection and
electrical equipment recycling contribute to preserve natural resources and
warrant waste recycling to protect environment and health.
In order to receive further information about electrical and electronic waste
collecting and recycling, contact your Local Council, the service of household
waste or the establishment where the product was acquired.
Malfunction
Without pot
“EI"
“E2"
“E3"
“E6"
“E7"
The fan delay scattering heat
Be "Off " state Automatically
Disposal
The function indicator will light, the digital display,
the buzzer will ring, the machine will turn off after this
state and last for one minute
The voltage is too high than AC275V/50Hz,
the buzzer will start ringing. The machine will turn off
after this state and last for one minute
The voltage is too low than AC100V/50Hz,
the buzzer will start ringing. The machine will turn off
automatically after this state and last for one minute
The IGBT Sensor is not working, the buzzer will ring.
The machine will turn off automatically after this state
and will last for one minute
The sensor of pot bottom is not working, the buzzer
will start ringing and machine will turn off automatically
and last for one minute
The temperature of pot bottom is over, the buzzer
will start ringing and machine will turn off automatically
and last for one minute
This machine will turn off automatically
after this state and last for one minute
Without operation will last for two hours
-9-
