1) Disconnect plug and wait until the unit is cooled down completely. Clean
after using every time.
2) If the pots/pans are used without being cleaned, discoloration or cooked
on stains may be caused.
3) Do not use benzine, thinner, scrubbing brush or polishing powder to clean
the induction cooker.
4) Wipe using dish washing agent and damp cloth.
5) Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
6) Never run water over the unit as it may damage the unit.
Problem and solution
How to clean
Error Code reason
Solution
--
Waiting Status
Place a suitable pot / pan onto the
induction cooking field. The plate
will work as usual
E0
Use of wrong / Small Pot
Use a correct pot
E2
open Circuit
Please return the device for repair
E3, E4
Voltage too low / Too High
Connect the device to a correct
power outlet
E5
Ceramic Plate is over heated
Allow the device to cool down, turn
it off completely and then on again
E6
overheat Protection
Allow the device to cool down, turn
it off completely and then on again
7
