How to Use
15) Do not block the air intake or exhaust vent.
16) Do not touch the top plate right after removing the pot or the pan, as the
top plate will still be very hot.
17) Do not place the unite close to the objects which are affected by magnet,
such as: radios, televisions, automatic-banking cards and cassette tapes.
18) The power cord must be replaced by qualified technicians.
19) This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Power Mode:
1) After the device has been turned on with the on/off key, it always
operates in the preset power mode and display shows.
The power indicator lights up and the digital display shows power
level 2000W.
2) you can select the power level (1-10) by turning the dial to the right + or
to the left -. If the power level is not displayed, you should select it via the
menu key.
3) If the induction cooker detects an excess temperature on the hob during
cooking it displays error message E6. The heating process it stopped and
the device switches to stand-by model for 60 seconds
4) The error message will not be cancelled until the temperature has dropped
to below 100°C
temperature Mode:
1) After turning the device on with the on/off key, the temperature mode can
be selected by pressing the menu key.
2) you can set the temperature level by turning the dial to the right + or to the
left – and selecting, for example, 140°C. The selected temperature level
appears in the display and blinks.
3) When the selection has been made, the indicator in the displays stops to
blink and the temperature level will be displayed within 5 seconds.
If required, another level can be selected anytime.
5
