Korona 41050, Instruction Manual, Page: 20 / 28

20
1. Place the appliance on an even and heat-resistant surface.
Do
not
place it on top of a metal surface.
2. Fill the the measuring spoon (8) with some oil (not more
than a tbsp.) and pour the oil on the cooking plate (5).
3. Fill the popcorn measuring cup (7) with popcorn kernels and
pour them on the oiled cooking plate (5).Do
not
exceed the
max. amount of one cup (60 g).
4. To close the appliance attach the bowl (1) to the base
(6). Press it slightly down and turn it clockwise until it is
securely engaged. Pay attention to the lock symbol on the
appliance.
Make sure that the bowl is properly secured
on the base.
5. Remove the lid (2) from the bowl (1) to allow the steam to
vent from the bowl.
6. Connect the appliance to a properly installed and easily
accessible socket.
7. Switch the appliance on by pressing the On/Off (3) button.
The indicator light (4) lights up in red and the heating up
process starts.
8. After approx. 1 ½ - 2 minutes the indicator light (4) goes off
and the heating up process is inished.
9. In order to avoid popcorn sticking to the plate (5) and
burn, hold the appliance on its handle and gently shake it
occasionally.
10. It will take approx. 5 – 6 minutes for the popcorn kernels to
pop.
11. Once the kernels have popped, switch off the appliance,
disconnect it from the mains and re-attach the lid (2) to the
popcorn bowl (1).
12. Hold the appliance irmly by its handle and carefully lip the
appliance 180°. Use pot handlers to avoid burns.
13. Remove the bowl (1) from the appliance by turning the bowl
(1) into anti-clockwise direction.