ASSEMBLY OF YOUR SLOW JUICER
1. Firstly assemble the jar onto the motor unit by following the operation as below:
Make the “
●
” symbol on the jar aligns with the “
” symbol on the motor unit and push the jar
downwards (See Fig.1) and then rotate the jar clockwise until it is locked on the motor unit tightly.
Make sure the jar is assembled in position properly otherwise the appliance will not operate. Besides,
before operating, please make sure that the buffer plate must be assembled well in the residue outlet
(See Fig.2).
2. Put the grinding head into the strainer and then place the strainer into the rotary cleaning brush.
After it, push the rotary cleaning brush downwards by making the symbol “
▼
” on the strainer align
with the symbol “
” on the motor unit. Make sure the grinding head is covered well into the axis of
the motor unit (see Fig.3).
3. Finally, assemble the hopper on the jar correctly. Firstly, put the hopper downwards and then make
the symbol “
” on the hopper align with the symbol “
” on the motor unit and then rotate the hopper
clockwise until the symbol “
●
” on the hopper aligns with the symbol “
” on the motor unit (See Fig.4).
Make sure the hopper is assembled in position properly otherwise the appliance will not operate.
Fig.1
Residue outlet
Buffer plate
Fig.2
Fig.3
Fig.4
