6
•
To exchange MIDI messages with your
computer
,
connect your computer to the USB B connector on
the prologue.
TIP
When connecting to MIDI device or a computer
some configuration is necessary. For details refer
to the Owner’s Manual (www.korg.com).
Connecting the SYNC IN and OUT jacks
•
Use the SYNC IN and OUT jacks when you want to
synchronize the output pulses and steps from the
SYNC IN/OUT jacks of the
Korg volca series
or the
audio out jacks of a
DAW
. Use a stereo mini-cable
for this connection.
TIP
For details refer to the Owner’s Manual (www.
korg.com).
Connecting a foot controller
•
The DAMPER jack allows users to connect a damper
pedal, such as the DS-1H. When pressing the damper
pedal, notes played on the keyboard will be ex-
tended, and continue playing even after keys are
released.
•
The EXPRESSION jack allows users to connect a vol-
ume/expression pedal, such as the XVP-20. This can
be used to apply modulation to the sound or effect
parameters to which it is assigned.
TIP
To ensure the proper functioning of the damper
pedal, polarity and other settings may need to be
adjusted, refer to the Owner’s Manual for details
(www.korg.com).
Connecting the power cord included (with
this keyboard)
Connect the included power cord to the AC Power
connector. We recommend that you first connect the
power cord to the prologue, and then connect the other
end of the cord to an AC outlet.
Make sure that your AC outlet is the correct volt-
age for your instrument.
Connecting to other devices
Connect the prologue as appropriate for your own
sound system.
Be sure that the power on all of your devices is
turned off before you make connections. Leav-
ing the power on when you make connections
may cause malfunctions, or damage your speaker
system and other components.
Connecting to audio devices
•
Connect your
powered monitor speaker
,
mixer
or
other components to the OUTPUT jack (monaural
output) of the prologue. Adjust the volume level us-
ing the MASTER knob.
•
Connect your
headphones
to the headphones jack.
This jack outputs the same signal as that of the OUT-
PUT jack.
Connecting to MIDI devices or a computer
•
To exchange MIDI messages with an
external MIDI
device
, connect the device to the MIDI IN/OUT con-
nectors on the prologue.
Rear panel
Computer
Sound module, rhythm machine, etc.
MIDI keyboard, rhythm machine, etc.
Groove machine
Powered monitor
Headphones
MIDI cable
USB cable
MIDI OUT
MIDI IN
SYNC IN
USB
INPUT
INPUT
Expression Pedal
Damper Pedal, Pedal Switch, etc.
to AC outlet
Power cord
(included)
mini cable
MIDI IN/OUT connectors
SYNC IN/OUT jacks
DAMPER jack
OUTPUT L/MONO, R jacks
~ACV (AC Power connector)
EXPRESSION jack
(Power switch)
(USB B connector)
(Headphones jack)
prologue-16
