193
Sequencer operating mode
Transport controls
Reference
The Sequencer operating mode is the full-featured onboard
sequencer, where you can create a Song from scratch, or edit it.
You can also use this mode to edit the initial parameters of a
Standard MIDI File, either made with an external sequencer or
with Pa2X’s own sequencer.
You can save the new or edited Song as a Standard MIDI File
(SMF, i.e., a file with the “.MID” extension), and play it back
either in Song Play or Sequencer mode – or on any external
sequencer.
Transport controls
To play back a Song, use PLAYER 1 transport controls (i.e., the
one on the left side of the PLAYER area). While in Sequencer
mode, you can only use Player 1 controls. Player 2 controls are
deactivated. See “PLAYER 1 TRANSPORT CONTROLS” on
page 10 for more information.
The Songs and the Standard MIDI File
format
The native Song format for Pa2X is the Standard MIDI File.
When saving a Song as a SMF, an empty measure is automati-
cally inserted to the beginning of the Song. This measure con-
tains various Song initialization parameters.
When an SMF is loaded, the empty measure is automatically
removed.
Sequencer mode and the MP3
While in Sequencer mode, you cannot load MP3 files. This
mode only allows for editing of the Standard MIDI Files.
Songs and Voice Processor Presets
You can use the Voice Processor while in Sequencer mode. For
this, just two settings are needed:
•
Select the Song track where you are recording chords for
the Voice Processor (see “Harmony Track” on page 215).
•
Select the desired Voice Processor Preset (in the Voice Pro-
cessor Preset section of the Global mode, see page 241).
Sequencer Play - Main page
Press SEQUENCER to access this page from another operating
mode. In this page you can load a Song, and play it back using
the transport controls for PLAYER 1 (see “Transport controls”
above).
Note:
When switching from Style Play to Sequencer mode, the
Sequencer Setup is automatically selected, and various track
parameters may change.
To return to this page from one of the Sequencer edit pages,
press the EXIT or SEQUENCER button.
To switch between Song tracks 1-8 and 9-16, use the TRACK
SELECT button.
Page header
This line shows the current operating mode, transposition and
recognized chord.
Operating mode name
Name of the current operating mode.
Master Transpose
Master transpose value in semitones. This value can be changed
using the TRANSPOSE buttons on the control panel.
Note:
Transpose may be automatically changed when loading a
Standard MIDI File generated with an instrument of the Korg Pa
series. The Master Transpose Lock parameter in the Global (see
“General Controls: Lock” on page 222) has no effect on the
Sequencer.
Sequencer operating mode
Song area
Page header
Page menu icon
Selected
track info
area
Sounds
area
Track volume/status area
Operating mode
name
Master Transpose
(in semitones)
Summary of Contents for pa2X pro
