manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 244

Global mode

236

DS2(M Hi): (Drumsample2 Mid High)

DS3(M Lo): (Drumsample3 Mid Low)

DS4(Low): (Drumsample4 Low)

Here, you can edit the sample parameters for the second, 
third, and fourth drum samples. For more information, 
please see “DS1 (High): (Drumsample 1 High),” above.

▼

5–2: Menu Command

• 0: 

Write Drum Kits

☞

p.255

• 1: 

Rename Drum Kit

☞

p.255

• 2: 

Copy Drum Kit

☞

p.255

• 3: 

Copy Key Setup

☞

p.255

• 4: 

Swap Key Setup

☞

p.255

For more information, please see “Global: Menu Command” 
on page 251.

5–3: Driver/EQ

Here, you can adjust the gain of the three-band EQ for each 
drum sample. These are offsets that are added to the settings 
of the program.

5–3a: Driver/EG

DS1 (High): (Drumsample 1 High)

DS1(High) On/Off

[Off, On]

This parameter is linked with “5–1b: Drumsample” DS1.

On (checked):

 Check this if you want to use DS1 (High). The 

selected drum sample will sound.

Off (unchecked):

 DS1 (High) will not be used. The drum 

sample will not sound.

Drive

[–99...+99]

This adjusts the drive level. This offset value for each key 
and drum sample is applied to the driver 

Drive

 (Prog 4–1a) 

setting of the programs that use this drum kit.

Low Boost (Driver Low Boost)

[–99...+99]

This adjusts the low boost level of the driver. This low boost 
setting for each key and drum sample is applied to the 
driver 

Low Boost

 (Prog 4–1a) setting of the programs that 

use this drum kit.

3 Band Parametric EQ [dB]

Low

[–36.0...+36.0]

Mid

[–36.0...+36.0]

High

[–36.0...+36.0]

These parameters adjust the gain for each band of the three-
band parametric EQ. The gain settings for each key and 
drum sample are applied to the 

LowGain

, 

MidGain

, and 

HighGain

 (Prog 4–8a) settings of the programs that use this 

drum kit.

DS2(M Hi): (Drumsample2 Mid High)

DS3(M Lo): (Drumsample3 Mid Low)

DS4(Low): (Drumsample4 Low)

Here, you can edit the sample parameters for the second, 
third, and fourth drum samples. For more information, 
please see “DS1 (High): (Drumsample 1 High),” above.

5–1a

5–3a

5–3
Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands