manualshive.com logo in svg

Korg M3, Parameter Manual

The Philips M3 User Manual is a comprehensive guide designed to assist users in maximizing the features and functionalities of their Philips M3 device. It provides step-by-step instructions, troubleshooting tips, and important safety information. Download the free manual from manualshive.com to ensure smooth operation and easy navigation.

Share
Download
background image

Modulation and Pitch Shift (Mod./P.Shift)

467

a: Control Mode
g: Voice 1: Resonance
i: Voice 2: Resonance

This parameter determines the resonance intensity.
When Control Mode = Manual, the Resonance parameter 
sets the intensity of resonance. If the Resonance parameter 
has a negative value, harmonics will be changed, and 
resonance will occur at a pitch one octave lower.
When Control Mode = LFO, the intensity of resonance 
varies according to the LFO. The LFO sways between 
positive and negative values, causing resonance to occur 
between specified pitches an octave apart in turn.
When Control Mode = D-mod, the resonance is controlled 
by the dynamic modulation source. If JS X or Ribbon is 
assigned as the modulation source, the pitch an octave 
higher and lower can be controlled, similar to when LFO is 
selected for Control Mode.

a: LFO/D-mod Invert

When Control Mode = LFO or D-mod, the controlled phase 
of either Voice 1 or 2 will be reversed. When the resonance 
pitch is set for Voice 1 (Resonance has a positive value), 
Voice 2 will resonate at a pitch an octave below (Resonance 
has a negative value).

f: Voice 1: Pitch
f: Fine [cents]
h: Voice 2: Pitch
h: Fine [cents]

The Pitch parameter specifies the pitch of resonance by note 
name. The Fine parameter allows for fine adjustment in 
steps of cents.

g: High Damp [%]
i: High Damp [%]

This sets the amount of damping amount for the high 
frequencies of the resonant sound. Lower values create a 
metallic sound with a higher range of harmonics.

041: Doppler

This effect simulates the “Doppler effect” of a moving sound 
with a changing pitch, similar to the siren of an passing 
ambulance. Mixing the effect sound with the dry sound will 
create a unique chorus effect.

a: LFO Mode
a: Src
b: LFO Sync

The LFO Mode parameter switches LFO operation mode. 
When Loop is selected, the Doppler effect will be created 
repeatedly. If LFO Sync is set to On, the LFO will be reset 
when the modulation source specified with the Src 
parameter is turned on.
When LFO Mode is set to 1-Shot, the Doppler effect is 
created only once when the modulation source specified in 
the Src field is turned on. At this time if you do not set the 
Src

 parameter, the Doppler effect will not be created, and no 

effect sound will be output.

The effect is off when a value for the modulation source 
specified for the Src parameter is smaller than 64, and 
the effect is on when the value is 64 or higher. The 
Doppler effect is triggered when the value changes 
from 63 or smaller to 64 or higher.

f: Pitch Depth

With the Doppler effect, the pitch is raised when the sound 
approaches, and the pitch is lowered when the sound goes 
away. This parameter sets this pitch variation.

g: Pan Depth

This parameter sets the width of the stereo image of the 
effect sound. With larger values, the sound seems to come 
and go from much further away. With positive values, the 
sound moves from left to right; with negative values, the 
sound moves from right to left.

j

Wet/Dry

Dry, 1 :99... 
99 : 1, Wet

Sets the balance between the 
effect and the dry input

Src

Off...Tempo

Selects a modulation source for 
Wet/Dry

Amt

–100...+100

Sets the modulation amount 
for Wet/Dry

a

LFO Mode

Loop, 1-Shot

Switches LFO operation mode

p.467

Src

Off...Tempo

Selects the modulation source 
of LFO reset

p.467

b

LFO Sync

Off, On 

Switches between LFO reset on 
and off when LFO Mode is set 
to Loop

p.467

Left

Right

Wet / Dry

Wet / Dry

Wet: Mono In - Stereo Out  /  Dry: Stereo In - Stereo Out

Pan Depth

D

-mod

+

Trigger

LFO Mode = 1-Shot

Doppler

LFO

c

LFO 
Frequency 
[Hz]

0.02...20.00

Sets the speed of the LFO p.449

Src

Off...Tempo

Selects a modulation source for 
LFO speed

Amt

–20.00...
+20.00

Sets the modulation amount of 
LFO speed

d

MIDI Sync

Off, On 

When this is on, the LFO speed 
is set by BPM, Base Note, and 
Times, instead of Frequency

p.448

BPM

MIDI, 
40.00...
300.00

MIDI syncs to the system 
tempo; 40–300 sets the tempo 
manually for this individual 
effect

p.448

Base Note

...

Selects the type of notes that 
specify the LFO speed

p.448

Times

x1...x32

Sets the number of notes that 
specify the LFO speed

p.448

e

LFO Type

Individual, 
Common1, 
Common2

Selects either (individual) LFO, 
Common FX LFO1, or Common 
LFO2

p.448

CmnLFO 
Offset [deg]

–180...+180

Sets the phase offset when 
Type = Common 1 or Common 
2

p.448

f

Pitch Depth

0...100

Sets the pitch variation of the 
moving sound

p.467

Src

Off...Tempo

Selects the modulation source 
of pitch variation

Amt

–100...+100

Sets the modulation amount of 
pitch variation

g

Pan Depth

–100...+100

Sets the panning of the moving 
sound

p.467

Src

Off...Tempo

Selects the modulation source 
of panning

Amt

–100...+100

Sets the modulation amount of 
panning

h

Wet/Dry

Dry, 
1 : 99...99 : 1, 
Wet

Sets the balance between the 
effect and the dry input

Src

Off...Tempo

Selects a modulation source for 
Wet/Dry

Amt

–100...+100

Sets the modulation amount 
for Wet/Dry

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M3

Furuno 001-558-430 Replacement Instructions Manual preview
001-558-430
Brand: Furuno Pages: 24
SIIG NN-EC2812-S1 Quick Installation Manual preview
NN-EC2812-S1
Brand: SIIG Pages: 12
8e6 Technologies ER3-100 (5K02-55) Quick Start Manual preview
ER3-100 (5K02-55)
Brand: 8e6 Technologies Pages: 74
ESD ECS-CPCIs/FPGA Hardware Manual preview
ECS-CPCIs/FPGA
Brand: ESD Pages: 28
UNA AUTOMATION DIFRA Installation Manual preview
DIFRA
Brand: UNA AUTOMATION Pages: 20
IBM 8677 - BladeCenter Rack-mountable - Power Supply Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power Supply
Brand: IBM Pages: 126
Bridgeworks Oresund EFC102200 User Manual preview
Oresund EFC102200
Brand: Bridgeworks Pages: 84
VideoWave Adam Device User Manual preview
Adam Device
Brand: VideoWave Pages: 12
Hologic ThinPrep 3000 Operator'S Manual preview
ThinPrep 3000
Brand: Hologic Pages: 256
Grizzly PSJ-VZ58 gen3 OEM User Manual preview
PSJ-VZ58 gen3 OEM
Brand: Grizzly Pages: 12
Lucent Technologies CIB40 Installation Manual preview
CIB40
Brand: Lucent Technologies Pages: 7
NuDAQ ACL-8112 Series User Manual preview
ACL-8112 Series
Brand: NuDAQ Pages: 92
StetSom STX2448 User Manual preview
STX2448
Brand: StetSom Pages: 18
Compaq ProLiant 4500 Quick Start Manual preview
ProLiant 4500
Brand: Compaq Pages: 2
MSE PSE-608R User Manual preview
PSE-608R
Brand: MSE Pages: 35
EZCast M2 User Manual preview
M2
Brand: EZCast Pages: 27
Z3 Technology Z3-DM8107-SDI2-RPS User Instructions preview
Z3-DM8107-SDI2-RPS
Brand: Z3 Technology Pages: 85
Roving Networks RN-131 User Manual preview
RN-131
Brand: Roving Networks Pages: 96

Brands by name

Popular brands

Load more brands