manualshive.com logo in svg

Korg M3, Parameter Manual

The Philips M3 User Manual is a comprehensive guide designed to assist users in maximizing the features and functionalities of their Philips M3 device. It provides step-by-step instructions, troubleshooting tips, and important safety information. Download the free manual from manualshive.com to ensure smooth operation and easy navigation.

Share
Download
background image

Sequencer mode

228

Portamento

[PRG, Off, 001...127]

Make portamento settings for each MIDI track. 

The portamento setting you make here will be used when 
the song is played or recorded from the beginning. If you 
change the setting while recording, it will be recorded as 
part of the musical data. (However if you set this to PRG, it 
will not be recorded.) You can change this setting during 
playback. However if you come to any Portamento On/Off 
data or Portamento Time data that was recorded, the 
settings will change accordingly.

When the track whose Status (Seq 3–1(2)c) is INT or BTH, 
MIDI control change CC#05 (Portamento Time) and CC#65 
(Portamento Switch) can be received to control this and 
change the setting. (If the setting is PRG, CC#05 Portamento 
Time will not be received.)

When you switch songs or return to the beginning of the 
song, tracks whose Status is BTH, EXT, or EX2 will transmit 
this setting via MIDI. If this is Off, CC#65 with a value of 0 
will be transmitted. If this is 001–127, a CC#65 of 127 and 
CC#05 of 1–127 will be transmitted.

If this is set to PRG, nothing will be transmitted.

This data is transmitted and received on the MIDI channel 
specified for each track by MIDI Channel (Seq 3–1(2)c).

Track 02...08, 09...16 (Track Number):

Here you can make OSC settings for MIDI tracks 2–8 and 9–
16. They are the same as for track 1. For more information, 
please see “Track 01 (Track Number):,” above.

▼

3–3(4): Menu Command

• 0: Memory Status

☞

p.271

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Rename Song

☞

p.271

• 4: Delete Song

☞

p.271

• 5: Copy From Song

☞

p.271

• 6: Load Template Song

☞

p.271

• 7: Save Template Song (Save as User Template 

Song)

☞

p.272

• 8: FF/REW Speed

☞

p.272

• 9: Set Location (Set Location for Locate Key)

☞

p.272

• 10: GM Initialize

☞

p.273

• 11: Copy From Combi (Copy from 

Combination)

☞

p.273

• 12: Copy from Program

☞

p.273

For more information, please see “Sequencer: Menu 
Command” on page 271.

3–5: Pitch T01–08, 
3–6: Pitch T09–16

Here you can make pitch-related settings for each MIDI 
track.

3–5(6)a: Location, Meter, Tempo, Tempo 

Mode, Song Select, Track Select, 
Reso, RPPR

3–5(6)b:Track Info

For more information, please see “0–1–1(2)a: Location, 
Meter, Tempo, Tempo Mode, Song Select, Track Select, Reso, 
RPPR” on page 195.

For more information, please see “2–1: Trim T01–08, 2–2: 
Trim T09–16” on page 224.

3–5(6)c: Pitch

Track 01 (Track Number):

Transpose

[–60...+00...+60]

Adjusts the pitch of each MIDI track in semitone steps.

12 units equal one octave.

Detune (Use BPM Adjust in Menu)

[–1200...+0000... +1200]

Adjusts the pitch of each MIDI track in one-cent units.

+0000:

 Normal pitch.

Note: You can also use the Detune BPM Adjust menu 
command (see page 188) to automatically make a detune 
setting from a calculation in BPM units.

 Transpose 

and Detune do not affect the notes 

transmitted via MIDI Out. Transpose and Detune can 
be controlled via MIDI RPN messages received on the 
Track’s MIDI channel. The way that this works depends 
on whether or not the Track uses an EDS Drum 
Program. 

If the Track does not use an EDS Drum Program–for 
example, if it uses a Single or Double EDS Program, or 
an RADIAS Program–then MIDI RPN Coarse Tune will 
control Transpose, and RPN Fine Tune will control 
Detune

.

If the Track uses an EDS Drum Program, MIDI RPN 
Coarse Tune and Fine Tune will be combined to control 
Detune

. The overall range is ±1 octave for coarse tune 

and fine tune together.

3–5c

3–5a

3–5b

3–5
Menu

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M3

Paradyne COMSPHERE 3800 Series Release Note preview
COMSPHERE 3800 Series
Brand: Paradyne Pages: 88
Paradyne COMSPHERE 3800PLUS Supplementary Manual preview
COMSPHERE 3800PLUS
Brand: Paradyne Pages: 5
Ubiquiti NanoBeam M5 Setup preview
NanoBeam M5
Brand: Ubiquiti Pages: 3
IDT TSI384 User Manual preview
TSI384
Brand: IDT Pages: 281
DMX4ALL DMX-Universal-Demux User Manual preview
DMX-Universal-Demux
Brand: DMX4ALL Pages: 17
Rockwell Automation 41LR4060 Instruction Manual preview
41LR4060
Brand: Rockwell Automation Pages: 108
Nvidia nForce 680I LT SLI Hardware User Manual preview
nForce 680I LT SLI
Brand: Nvidia Pages: 80
M86 Security M86 Web Filter User Manual preview
M86 Web Filter
Brand: M86 Security Pages: 309
TDK InvenSense RoboKit1 Hardware Reference Manual preview
InvenSense RoboKit1
Brand: TDK Pages: 13
Z3 Technology Z3-SBE264-10 User Instructions preview
Z3-SBE264-10
Brand: Z3 Technology Pages: 67
Powerleap PL-PROMMX Manual preview
PL-PROMMX
Brand: Powerleap Pages: 28
Idis DR-2308P Quick Manual preview
DR-2308P
Brand: Idis Pages: 18
TANDBERG 240LTO Quick Start Manual preview
240LTO
Brand: TANDBERG Pages: 2
sound4 STREAM X Maintenance And Operation Instruction Manual preview
STREAM X
Brand: sound4 Pages: 66
Intel SRCSASPH16I - RAID Controller Hardware Manual preview
SRCSASPH16I - RAID Controller
Brand: Intel Pages: 28
Ross ULTRIX-FM-NS-1RU Install Manual preview
ULTRIX-FM-NS-1RU
Brand: Ross Pages: 5
Netopia D3100-I User Reference Manual preview
D3100-I
Brand: Netopia Pages: 138
Cypress Semiconductor CY7C1480V25 Specification Sheet preview
CY7C1480V25
Brand: Cypress Semiconductor Pages: 32

Brands by name

Popular brands

Load more brands