Korg KONTROL49, Installation Manual

Page: 5 / 33

5
Installing the Editor Librarian software
Installation guide
Mac OS X users
To install the software into Mac OS X, proceed as follows.
The screens shown in this document are from Mac OS X version 10.3.
1
Insert the included CD-ROM into your CD-ROM drive.
2
In the Editor Librarian software “KONTROL49” folder of the CD-ROM, double-
click “KONTROL49 Editor.pkg” to start up the installer.
3
Depending on the version of your operating system, a verification dialog box
may appear at this point. If so, input your password and click [OK].
When the installer starts up, the following screen will appear. Click [Continue].
4
“Important information” will be displayed. Read the contents and click [Con-
tinue]
.
5
The “Software License Agreement” will appear. Carefully read the contents, and
click [Continue]. A dialog box will appear. If you accept the terms of the soft-
ware License agreement, click [Agree].
6
The “Choose installation destination” screen will appear. Choose the installa-
tion destination, and click [Continue].
7
The “Easy Install” dialog box will appear. Click [Install].
8
Depending on the version of your operating system, a confirmation dialog box
may appear at this point. If so, input your password and click [OK].
9
When installation has been completed successfully, click [Close] to close the
installer.