23
SYNTH
PITCH
BEND RANGE [0.00...12.00 (0...1oct)]
Specifies*the*amount*of*pitch*change*that*will*occur*when*
you*use*the*pitch*bend*wheel.*This*setting*specifies*the*pitch*
change*that*will*occur*when*the*pitch*bend*wheel*is*rotated**
all*the*way*in*the*positive*(+)*direction.
TRANSPOSE [-12...+12 ]
Adjusts*the*pitch*of*the*oscillator*in*steps*of*one*semitone*
(100*cents).*
Automation
The*values*of*the*switches*and*knobs*can*be*stored*for*each*
step*of*a*pattern.*This*lets*you*automatically*control*those*
parameters*while*the*pattern*plays.
Here’s*an*example*of*recording*and*editing*the*movement*
of*a*knob.
Recording knob movements
1.
In the synth screen, tap the REC button and then the
PLAY button to start recording.
2.
Use the desired knob.
You*can*also*use*several*knobs*to*record*them.
3.
Tap the REC button.
Recording*will*end,*and*you’ll*switch*to*playback.*The*
volume*will*change*as*the*steps*progress.*The*knobs*will*
also*move*automatically.
Editing the recorded automation
1.
For approximately one second, touch and hold a knob
whose movement you recorded.
The*automation*edit*screen*will*appear.
2.
Drag the bar for each step up or down to edit the value.
3.
To close the edit screen, touch any area of the synth
other than the setting screen.
