5
SMF START
After you have pressed the START/STOP key, the user interface of the sequencer appears and the file
will be played back automatically. You can stop the music at any point by pressing the START/STOP
key again. At the end of the song the display automatically enters DISK mode.
EDITING THE SMF IN SEQUENCER MODE
After you have selected the song, press the "LOAD" button to edit the song in the sequencer.
TIPS FOR EDITING SONGS AND STANDARD MIDI FILES:
After the song or Standard MIDI File has been edited, it should be stored to the same memory
location of the hard disk partition!
OPERATIONAL STEPS FOR EDITING SONGS:
a)
Load the song into the song memory (please refer to the corresponding section).
b)
Edit the song.
c)
Use the "DELETE SONG" function on page 5: UTILITY of DISK mode to delete the old song.
d)
Select "SAVE ALL SONG" on page 3 of Song mode and save the edited song.
OPERATIONAL STEPS FOR EDITING SMFs:
a)
Load the SMF into the SMF memory (please refer to the corresponding section).
b)
Edit the SMF.
c)
Use the "DELETE FILE" function on page 5: UTILITY of the DISK menu to delete the old SMF.
d)
Select "SAVE SMF" on page 3 of File mode and save the edited SMF.
3. Function "COPY FILE"
On Page 5 of DISK mode the menu item "COPY FILE FUNCTION" offers a Direct Copy function. You
can use this function to copy all data (Arrangements, Styles, Songs, Programs) from a floppy disk or
hard disk partition directly to a different hard disk partition.
Select page 5 "UTILITY" of DISK mode. Use the cursor position key to select the "COPY FILE"
function. Press cursor position key A to choose the drive from which the data (FILES) will be copied.
Use cursor position key B or C to select the desired files and cursor position key E to choose the hard
disk partition or floppy drive to which the data will be stored. Use cursor position keys H and E to
execute this command.
