KPE-1 EasyStart
Making Connections and Setup
1.
Connect the Left/Right audio output of a VCR/DVD/CD player or DJ Mixer to the Left/Right audio input of the
KPE-1 and adjust the LINE INPUT VOLUME so that the PEAK LED does not turn red. Decide whether the
KPE-1 will be used in a DIRECT or FX LOOP connection on the back panel of the KPE-1. If the signal is
coming directly out of the KPE-1 into an external mixer, powered monitor pair or headphones, then set the
CONNECTION to DIRECT. If the KPE-1 is connected to a Send/Return of a DJ mixer or Line Mixer, then set
the CONNECTION to FX LOOP.
2.
If you are using a composite video output (RCA type) from the video source, connect it to the Video input on
the rear of the KPE-1. If you are using an S-Video output, connect it to the S-Video input on the front panel of
the KPE-1 and press the VIDEO SELECT switch in so that INPUT 2 is selected.
3.
Decide if your using NTSC or PAL format (USA standard is NTSC, PAL is usually Europe) and set the switch
on the rear panel to the proper setting.
4.
Connect the Video output of the KPE-1 to your monitor (S-Video or Composite RCA type) and the Audio
output of the KPE-1 to a mixer/DJ mixer or Monitor Audio inputs.
5.
If you are using the KPE-1 as an audio processor only, set the CONTROL SELECT switch to AUDIO.
6.
If you are using the KPE-1 to process video, set the CONTROL SELECT switch to VIDEO.
7.
If you are using the KPE-1 to process audio and video simultaneously, set the CONTROL SELECT switch to
COMBI.
Selecting and storing Programs to the Program Memory Keys
1.
Turn the PROGRAM/BPM knob to select a program.
2.
When you have selected a Program you like, press and hold the PROGRAM MEMORY key that you would
like to use until it flashes.
Selecting and Storing Combi Programs
1.
To select a preset COMBI program, set the CONTROL SELECT switch to Combi and use the
PROGRAM/BPM knob to select a COMBI program.
2.
To create your own Combi, select the Audio program you would like to use by setting the CONTROL SELECT
switch to AUDIO and choosing your Video program.
3.
Next, set the CONTROL SELECT switch to VIDEO and select the Video program you would like to use.
4.
To store a Combi to a PROGRAM MEMORY location, set the CONTROL SELECT switch to COMBI. Press
and hold the FUNCTION key, then press and hold down the desired PROGRAM MEMORY key until it flashes
(approx. two seconds).
2
