Quick Start
JetPort Serial Device Server User’s Manual
2-3
Off
No data is being transmitted or received through the serial port.
Connecting the Power
Connect the power jack input with the enclosed 12VDC power adapter, or 24VDC power input.
The power LED will show red color until the system is ready. If the IP setting is running correctly,
the power LED will turn green.
Connecting to the Network
Connect the Ethernet cable to the JetPort 10/100M Ethernet port. If the 10M Ethernet is working,
the Link/Act LED will blinking orange. If the 100M Ethernet is working, the Link/Act LED will
blinking green.
Connecting to the Serial Device
Connect the serial device to JetPort by RS232 interface cable. JetPort serial port is a standard
DB9 male port.
Software Setup
Install JetPort Commander
1.
Insert the CD and auto-run the program. If the setup does not auto-run, select “JetPort
5201”, and “Operation System”, run JetPort Setup.exe to install Windows utility, JetPort
Commander.
2.
When the installation is finished, there are three options:
9
Launch JetPort Commander Now: Start configurations.
9
Visit Korenix registration page: Register products to Korenix.
9
Launch JetPort later: Start configurations later.