Korenix JetNet 3008 User Manual Download Page 2

 

Content 

1. Introduction .....................................................1

 

1-1. Features ............................................................ 1

 

1-2. Packing List....................................................... 2

 

2. Hardware Description .....................................3

 

2-1. Dimensions ....................................................... 3

 

2-2. Front Panel ....................................................... 3

 

2-3. Bottom View ...................................................... 4

 

2-4. LED Indicators .................................................. 5

 

2-5. Ports.................................................................. 6

 

3. Mounting Installation.......................................7

 

DIN-Rail Mounting .................................................... 7

 

4. Hardware Installation ......................................8

 

4-1. Wiring the DC Power Inputs.............................. 9

 

4-2. Wiring the Alarm Relay ................................... 10

 

4-3. Wiring Earth Grounding .................................. 10

 

4-4. Enabled the Event Alarm Function ................. 11

 

4-5. Cabling ............................................................ 12

 

4-6. System Power-On and Testing ....................... 13

 

5. Packet forwarding ability...............................16

 

5-1. Broadcast Control ........................................... 16

 

5-2. Quality of Service ............................................ 16

 

6. Trouble shooting ...........................................19

 

 

 

 

Summary of Contents for JetNet 3008



























Reviews: