15
to the n
etwork device’s Gigabit ethernet port.
9. Check the LED indicator of port status (blinking green) on the JetCon 1701GP-
U to see if the network connection is successfully established. Power on the
PC host, activate the Command Line mode, and ping the connected Ethernet
device to see if it responds.
9.1
To enable the “Command Line mode”, click
Run
in the Start menu, type
Command
, and click
OK
to continue.
10.
10.1 Type ping 192.168.1.1 command to check the connection. Here we use IP
address 192.168.1.1 as an example. Before the testing, be sure your PC
host and target device are in the same subnet.
