Korenix JetCon 1100 Series, User Manual

Page: 19 / 28

15
Perform install driver from specific location – CD-ROM. The path of driver is CD-ROM\product
\Driver\ , and under the folder there are several sub-folders for different operating systems.
Above figure shows there is 4-port High Speed RS-232 device. Therefore, the computer
system will request install driver 4 times for physical port-1 to port-4, and in the device manager
of computer system will add new USB-Serial port with new logical COM port number as
following figure.
If the computer system shows- “the driver is not verified..”, and asking to stop install driver.
Then ingonre it and click the cutton “
Continue Anyway ” to finish the driver installation.
Configure the COM port Properies
Sleclec the USB/Serial COM port and click the right button of mouse, then into the USB serial
Port Proerties setting interface. Click and select the parameters to matchserial baud rate with
connection partner. The following picture show serial communication parameters includes bit
rate, data bit, parity check mode,stop bit and flow control mode.