Korenix JetCon 1100 Series, User Manual

Page: 18 / 28

14
Follow below steps to mount the
converter onto standard DIN rail track.
1. Insert the bottom of the DIN-Rail clip
into the DIN-Rail track from its low
side.
2. Lightly push up Converter and press
close to DIN-Rail clip, and make sure
the upside clip is locked into the
track.
3. Check if the DIN-Rail clip is tightly
attached to the rack.
4. To remove the converter from the track, reverse the steps above.
3 Software Driver Installation
The JetCon 1100 and JetCon 1200 series support several operating systems; the USB driver
supports Windows 2000, XP, Vista, Windows Server 2003, Windows 2008, Windows 7, Linux
O.S. 2.4~2.7 and Macintosh O.S. 6/7. The driver will exist in the CD_ROM which is packing in
the unit box. Once connects and plus-in the USB interface to computer, the system will search
available driver and request install new driver if computer did not install proper software driver
before. The following figure shows the computer request user to install 4-port high speed
USB/RS-232 driver.