16
Mechanical installation
Operation Manual Expansion Module SO CM-E
1800.202B.0-01 Date: 02/2019
3.4 Installation of the devices for wall mounting
Step
Action
Comment
1.
Arrange the devices on the backing plate as per Bild 3.1.
Please also provide enough space to the left of the supply
unit for the MotionOne CM controller.
Align all devices in a multi-axis group in a line along the
top edge of the devices.
This action is necessary to be able to
couple the DC link using the busbars.
2.
Mark out the position of the tapped holes on the backing
plate.
Drill holes in the backing plate and cut a thread for each
fixing screw in the backing plate.
Pay attention to the bending radius of the
connection cables!
For hole spacing and dimensional drawings
see Table 2.1, Bild 3.4
3.
Mount the CM-E module vertically on the backing plate.
The contact surface must be bare metal
and conductive.
You will find the next steps for the electrical installation in chapter 4.
3.4.1
Dimensions, wall mounting model
ServoOne CM-E
BG1 (Single/Dual/Dual End)
Weight approx.
2.8 kg
H (height)
310
B (width)
54.5
T (depth)
241
A
27.5
C
299
C1
6
Side clearance
Direct butt mounting
D Ø
5
All dimensions in mm
Table 3.1 Dimensions and mounting clearances for wall mounting
241,00
54,50
310
5
27,25
6
299
Figure 3.4 Dimensional drawing, SO CM-E module (for dimensions see Tabelle 3.1)
