28
First installation
Once all the connections have been made it is possible to turn on the TV and then the
device via the supplied remote control. The display will show the writing
ON.
In this menu you can:
●
[
OSD
Language
] press the
Vol-/Vol+
buttons to select the language used by the
device.
●
[
Country
] press the
Vol-/Vol+
keys to select the country where the device will be
used. This choice is critical because for a correct reception of the channels.
●
[
FTA Only
] press the
Vol-/Vol+
keys to select
ALL
(for Free and encrypted
channels) or
FTA
just for free channels.
●
[
Search Mode
] press the
Vol-/Vol+
keys to select
DVB-T2.
●
[Antenna Power
] select the option
On/Off
to supply/don’t supply the signal on the
antenna output.
Use the arrows
CH+/CH-
to move to
Channel Search
and click the
OK
button.
Automatic channel tuning will start immediately. This process is completely automatic
but can last several minutes. After tuning, you can watch TV.
In the lower part, in menu mode, there is a legend with the active
keys on the displayed page.
●
Use the [arrows
Vol-/Vol+
and
CH+/CH-
to move through
the menus and change their settings.
●
Tap on thebutton
OK
to confirm the selection.
●
Tap
Exit
to exit.
Antenna Power:
●
Set to ON when having an active antenna without power adapter.
●
Set to OFF when having passive antenna or active antenna with
power adapter.
Playback
Once USB memeory with data is connected, press the button
USB
to view the files.
Select the file from the video to play and touch
OK
. Press
Stop
to stop playback.
The EPG function allows information on channel programming
up to a maximum of 7 days. This information depends on the
individual channel.
●
Some devices may be not compatible. When large capacity
memories are connected, the device may take some time to
analyze the entire contents.
●
The use of slow memories / non-USB2.0 interface can
produce problems during playback.
●
The device supports the following file systems:
FAT32,
NTFS.
