- 3 -
Main landing gear mount:
Glue the part „1“ to the R.H. fuselage shell
(caution: part „1“ has to be glued in the correct
way).
Glue the 3 plywood parts together with the „C“
shaped part in the centre using the dispersion
adhesive. This has to be glued between the parts
„2“ and „3“ and then to the fuselage. The same
procedure has to be done on the other fuselage
shell.
Front landing gear mount:
Glue the magnet to the centre of the plywood plate
(size 28x18 mm) using 5 min. epoxy.
Draw a vertical line 125 mm from the front of the
fuselage, the length according the brass tube, from the
bottom of the fuselage – see pictures (don´t glue the
tube yet).
Make a horizontal cut approx. 2-3mm above this tube
and 10 mm deep for the plywood plate with the magnet
and glue it in this position – the magnet is facing down
(must touch the brass tube). Be careful not to put any
glue on the magnet.
