Kopp MULTIversal, Instruction Manual

Page: 5 / 22

5

Please read the operating instructions carefully!
Dependable function of the radio multiple socket
outlet is only ensured if it is used in accordance with
the following instructions.
Power supply
Insert grounding-type plug of the mains cable into
the grounding-type outlet. If power is interrupted,
the radio multiple socket outlet is switched off.
Switch the radio multiple socket outlet on again by
means of radio command.
Status display - error notification

• LED (red) illuminates = radio multiple socket
outlet switched on
• LED (green) illuminates = programming mode
activated
• LED (green) goes out 1x = Radio transmitter signal
correctly received and saved.
• LED (green) blinks 3x = Internal program memory
full. Programming not possible.
• LED (green) blinks quickly = Attempt to program
the same transmitter multiple times. Programming
not possible.
Switching procedure
All 5 outlets are mutually switched ON or OFF with
one radio command.
Control possibilities:
Radio multiple socket outlet is only a receiver.
Up to 16 transmitters can switch the radio multiple
socket on and/or off.
Switching the radio-multiple socket outlet on and/
or off by means of:
(See separate operating instructions)
• Radio wall switches
• Radio hand transmitter
• Radio hand transmitter mini
• Radio motion sensor Paris/Europe
• Radio motion sensor AP
• Radio time switch clock
* Switching on the radio-multiple socket outlet by
means of:
• Radio smoke alarm
• Radio water alarm
• Radio gas alarm
• Radio CO gas alarm
• Radio heat alarm
• Radio magnetic sensor
• Radio broken glass sensor
• Radio burglary alarm center
* Note:
If the radio-multiple socket outlet is switched on
by one of these devices, a previously programmed
radio wall switch and/or radio hand transmitter must
be used to switch it off.