5. Follow the steps in sec on 7
‘Securing your child ‘ to finish the installa on.
Unfastening your child seat
To unfastening your child seat,please pull the Smart fix release bu ons on both sides
Installation
in
the
vehicle
(6-D)
(6-E)
Important:
7. Securing your child
Securing your child
-Before securing your child in the child seat, please make sure the headrest is
adjusted to the correct posi on (see sec on 4.2)
-Check your vehicle’s manual to see if your vehicle is equipped with ISOFIX
lower anchorages; choose one method of installa on in the vehicle, either
sec on 5 or 6 was followed correctly.
1. Have your child sit down in the child seat, and slide the diagonal belt guide locking piece
to open it. Pull out the safety belt and guide it to in front of your child to the seat buckle.
2. Buckle it up with an audible ‘Chick’.(7-B)
3. Guide the lap belt and one end of diagonal belt to the belt guides under the both
4. Insert the other end of the diagonal belt into the belt guide under headrest, that slide
the locking piece to close it.(7-D)
5. Remove all the slackness of safety belts to the retractor.(7-E)
Checklist before you go:
-The diagonal belt must run over in the middle of your child’s shoulder, not in his or her neck.(7-F)
-The lap belt must lie as low as possible on your child’s pelvis on both sides.
-No parts of belt should be twisted.
-Make sure the safety buckle is not rested on the lap belt guide.(7-G)
B
elt
guides
（
OPEN
）
OPEN
7-A
7-B
7-C
colose
Belt
guides
（
colose
）
7-D
7-E
7-E
(7-A)
armrests.(7-C)
Securing your child
Installation
in
the
vehicle
6-A
6-B
6-C
6-D
6-E
7-G
7-F
