18
ATTACHMENT OF ACCESSORIES
- Use the key to secure the collar.
- Loosen the collar nut.
- Insert the accessory shaft into the collar.
- Tighten the collar nut.
- Remove the key.
- To remove the accessory proceed in the reverse order.
ON / OFF
- To turn on the tool, set the ON / OFF switch (1) to ‘I’
- To turn off the tool, set the ON / OFF switch (1) to ‘0’
SPEED ADJUSTMENT
The tool is equipped with a wheel (2B) for adjusting the speed.
The tool is equipped with 4 speeds.
- Rotate the adjuster wheel (2B) to the desired speed
- To work with wood and plastic, choose a low speed
- Choose a low speed for polishing
POLISHING
- For polishing metal and plastic pieces use a disc
- The polishing disk is mounted using a spindle
- Place the spindle (6A) in the collar nut (4B)
- Place a polishing disk (7A) on the spindle
